Jiangsu LCD Technology Co., Ltd
Jiangsu LCD Technology Co., LTD Let LCD all over the world!
Add to Cart
Working flow
Uncoiler—Feeding—roll forming--- hydraulic cut to length—output table
Introduction of factory
Wuxi LCD Technology Co.,lTD is based in Wuxi City, Jiangsu Province, we specialize in manufacturing all kinds of roll forming machines, production lines, punching machines, cutting and slitting machines, we have professional technician team, they can design the machines according to your requirements.
Components of the machine
| Name | Quantity ( set) |
| Passive decoiler | 1 |
| Feeding platform | 1 |
| Molding shearing mechanism | 1 |
| Hydraulic station | 1 |
| PLC control | 1 |
| Encounter | 1 |
| Hydraulic cutter | 1 |
| Output table | 1 |
Technical parameters
| Productivity | shutter as the drawing |
| Material specification | Aluminum, galvalume, galvanized and pre-painted galvanized steel. |
| Thickness | 0.5 mm to 1.0mm. |
| Main motor power | 4.5 kw. |
| Hydraulic station power | 3 kw. |
| Feeding width | Depends on the model of profile. |
| Yield stress | 235Mpa(33KSI) ~ 350Mpa |
| Roll forming Speed | 12-15 m/minute. |
| Cutting Tolerance | +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm) |
| Manual Uncoiler | Max. Capacity: 3000kgs |
| Coil inner diameter | 508mm/610mm. |
| Voltage | 380v/50hz/3 phase |
| Numbers of stands | 12 stands/stations/pairs for each roll forming system |
| Roller Material | High grade No.45 forged steel, coated with hard chrome |
| Shaft Material | High grade No.45 carbon wrought steel |
| Cutter blades | Cr12 mould steel with quenched treatment |
Machine pictures