Cable Ladder Roll Forming Production Line , Cable Tray Machine Manual Handle

Cable ladder cable bridge cable tray roll forming production line​

Main specifications

1). Material width 860mm
2). Material weight 6000kg
3). Material outer diameter 1200mm
4). Drive power: Electromotor and speed reducer integration, 4KW frequency conversion electromotor
5). Frame type: Cantalever inner support, manual handle afterbody, pneumatic press cantalever.
6). Working rolls: 11 rolls, up 4 / down 5, the residual 2 rolls is clamp deliver rolls.
7). Flatting bound: Material thickness 1 - 2mm, material width 100-860mm
8). Drive power: 5.5kw frequency conversion electromotor
9). Speed reducer model: ZQ250
10). Flatting speed: 3-10 m/min
11). Parenthesis up and down a pair of fortified wheel
12). Amount: Each kind of width specification 1 set dies, total 6 sets
13). Die require: Cr12 quench
14). Electromotor power: 4.4kw
15). Multistage type feeding, memory ten group of memory functions
16). Man-machine contact surface numerical control system
17). Uses Mitsubishi servo meterHydraulic pumping station: 5.5kw
18). Blade material : Cr12, quench treatment
19). Amount: 1 set
20). Frequency conversion: 3 sets(in main control cubicle, control decoiler, flatting and roll forming machine)
21). PLC control: 1 set
22). Inch liquid crystal touch screens
23). All electrical element is the Mitsubishi original installation brand
24). Amount: 3 sets (follow decoiler, flatting, roll forming machine)
25). Control type : Manual handle

Main component

Decoiler-------------------------------------------------------------------------------------------------1 SET

ML900 flatting-----------------------------------------------------------------------------------------1 SET

200 punch, punching die--------------------------------------------------------------------------1 SET

Servo feeding-----------------------------------------------------------------------------------------1 SET

Guider---------------------------------------------------------------------------------------------------1 SET

Main roll forming machine-------------------------------------------------------------------------1 SET

Follow cutting------------------------------------------------------------------------------------------1 SET

Cut-to-length part-------------------------------------------------------------------------------------1 SET

Clectrical control cabinet----------------------------------------------------------------------------1 SET

Run out table -------------------------------------------------------------------------------------------1 SET

Biref introduction

This machine is used for producing metal cable tray, the cable tray system is used for supporting insulated electrical cables which are used for power distribution, control and communications, in different area, the design of the cable tray is different, so we make different design of the machines.
Normally, we can design whatever you provide.( here I refered to the drawings of the cable tray)

Machine pictures